photoshop通道混合器的原理及运用的详细解释（The principle and application of the Photoshop channel mixer are explained in detail）.docVIP

photoshop通道混合器的原理及运用的详细解释（The principle and application of the Photoshop channel mixer are explained in detail） PhotoShop channel mixer principle and the use of detailed explanation.Txt I envy some of the old people envy them hand in hand until the last.. - pay the bill when they found themselves so valuable. Each tool has its theoretical foundations of programming, and more people just use it correctly, as if you could drive a car without having to understand the principles of the engine. We set out some regular conclusions through experiments. First talk about the relationship between channel brightness and color change: General rule: in RGB color mode, Channel red - the brighter the picture, the redder (greener); the darker the greener (Jian Hong); Channel green - the brighter the picture the more green (minus the product); the darker the more the product (less green); Channel blue - the brighter the picture, the more blue (minus yellow); the darker the yellow (minus blue); Now build a suitable size document with a neutral gray color (H=0, S=0%, B=50%, or R=G=B=128, or #80808, etc.). The panel of the channel mixer is shown in figure 1. Figure 1 The channel mixer works only in the RGB color and CMYK color mode, and is not available in other color patterns. The channel mixer is an adjustment layer. With an all white mask, the channel mixer acts on the entire channel; with the local transparent mask, the channel mixer acts only on the local transparent region of a channel. In RGB color mode, the output channels are only red (Alt+3), green (Alt+4) and blue (Alt+5). In CMYK color mode, the output channels are only cyan (Alt+3), magenta (Alt+4), yellow (Alt+5), black (Alt+6). In the panel of the mixer mixer, the red percentage, green percentage, and blue percentage are the percentages of the channel red, channel green, and channel blue corresponding to the original channel. For example, in the repair of the channel, a channel noise is often too much, the quality is not