plc控制技术（PLC control technology）.docVIP

plc控制技术（PLC control technology） PLC control technology It is a real-time system with motor control system for personal computer in the traditional relay based, whenever the modification of design, the whole system almost always re production, not only time-consuming and laborious; at the same time due to bad contacts, relay and wear, large volume of defects, resulting in higher costs, low reliability, no easy maintenance and other issues. In order to improve these shortcomings, the United States published for the first time in 1969: DEC PLC (Programmable Controller). The program is called the controller in the published early (Programmable Logic -Controller) PLC, the first aim is to replace the relay, relay execution sequence control logic and other timing or counting function, so called sequence controller, its structure is like a micro computer, so it can be called a programmable logic controller (MCPC) until 1976, the United States, motor manufacturing Association officially given named Programmable Controller, programmable controller, referred to as PC, because of the personal computer (Personal Computer) is very common, and often can be used with the program controller, in order to distinguish between the two, it is generally called programmable controller for the PLC to be there the market respectively. The type of PLC, in accordance with the manufacturers and application places vary, but each label can be divided into unit complexity, Small; and other factories and schools usually use a small PLC, the Japanese MITSUBISHI F series MITSUBISHI and the production of Chinas Shihlin Electric A series PLC is used by the Chinese love. This will be based on MITSUBISHI FX2 CAI PLC to be introduced at the user to have a deeper understanding of the PLC, can be more handy in using the PLC programmable controller. The internal structure can be used to represent the basic, the internal unit including CPU, input module, output module three departments, PLC CPU will be throug