pxe 配置（PXE configuration）.docVIP

pxe 配置（PXE configuration） PXE configuration Summary Client through network card PXE functions from DHCP The server gets the IP address; DHCP The server willfilename Pxelinux.0; the file specified in parameter is pushed to the client (pxelinux.0); Client execution Pxelinux.0; Pxelinux.0 Program reads TFTP Configuration file on the server (usually /tftpboot/pxelinux.cfg/default, but it can also be based on client machines MAC address individually specified); The client executes the actions specified in the configuration file. TFTP Install the following two packages: Tftp-server TFTP One server side, one client program. TFTP services by Xinetd service management. edit /etc/xinetd.d/tftpfile, will disable = yeschanged to: Disable = no Restart xinetd: # /etc/init.d/xinetd restart # chkconfig --level 35 xinetd on DHCP Using ISC Dhcpd software: RPM -ivh --aid dhcp-3.0.1.rpm # CP -f /usr/share/doc/dhcp-3.0.1/dhcpd.conf.example /etc/dhcpd.conf # Modify /etc/dhcpd.conf File, specify IP address and other information. At/etc/dhcpd.conf Increase tftp-server in Startup files that need to be pushed to the client: Filename pxelinux.0; Because TFTP The default directory for this file is /tftpboot, so the absolute path to the file is: /tftpboot/pxelinux.0 You can also specify another path. Additionally, you need to specify next-server Parameter tells the client to get the pxelinux.0 Where do I get the rest of the boot files after the file?: Next-server ; Does the allow BOOTP or deny BOOTP respond to the activation query?; Does the allow booting or deny booting respond to user queries?; PXE Install syslinux Using syslinux Provide PXE installation (RedHat Enterprise Linux installed by default). Syslinux Home page: Http:/// Syslinux Download: Http:///pub/linux/utils/boot/syslinux/ You can download the RPM package directly. To configure /tftpboot/pxelinux.0 Install syslinux Later, the pxelinux.0 This file is copied to/tftpboot Catalog： RPM -ql syslinux greppxelinux.0| # / usr /分享/ sysli