redme（redme）.docVIP

redme（redme） U disk, please insert the disk into the drive solution U disk, please insert the disk into the drive solution When a colleague brings an U disk and inserts the USB socket, the U disk indicator lights up and displays the disk symbol on my computer. However, when you double-click it, a prompt appears: insert the disk into the drive.. The same hints appear when formatting this disk. Do nothing. Try to find a solution, as follows: 1, right-click My computer, storage management: - Disk Manager, in the right side of the interface can be seen on the logo, on behalf of the flash and click on it, select a partition, format and follow the prompts to complete the operation, is expected to solve the problem. 2, download the star shuttle low-level formatting tool, low-level format for flash memory. U disk repair tool (PortFree Production Program 3.27) usage: (1) click the OPTION in the lower right corner of the software, and the following window appears. (2) please select Others and select Type - Removable (3) please select Capacity Adjust and select the capacity of your U disk here. If you dont have the capacity you want here, click ADD to fill in the capacity you need. (4) select the Flash Test, select Low Level Format; there are two parameters, one is the All Blocks (which means low formatting of the entire disk), another is Good Blocks (it means only low formatted blocks, the parameters suitable for containing U disk bad area) (5) after the above method is selected, click OK to save the settings, then connect the U disk to the computer, click RUN, and start the low format. The two methods seem to work well, but they are not good enough when applied to this U disk. 1, the upper half of the right side of the screen can not see the symbol of flash memory, the lower half has, but can not shop hit, in vain; 2, according to the RUN in the future, my computer U disk drive U disk disappeared, the lights do not flash, low-level formatting cannot be completed. Attached 5