vvv数控加工工艺小技巧（VVV CNC machining skills）.docVIP

vvv数控加工工艺小技巧（VVV CNC machining skills） Machining process analysis of numerical control lathe with multi thread CNC lathe, thread processing First, the basic features of the thread In machine manufacture, thread connection is widely used, such as the connection of spindle and chuck of NC lathe, the fastening of screw to tool, the transmission of screw nut and so on. It is formed on the cylinder or cone surface, along the spiral line with a fixed tooth type of continuous convex and groove, there are two kinds of external thread and internal thread. According to the shape of the thread section, there are four kinds of triangle thread, trapezoidal thread, saw tooth thread and rectangle thread. According to the number of threads, they can be divided into single thread and multi thread. In the various machinery, the role of threaded parts are important as follows: first, for connection and fastening; two is used to transfer power, change the movement situation. Triangle threads are often used for connecting and fastening; trapezoidal threads and rectangular threads are often used to transmit power and change motion. Because they use different techniques and processing methods are not the same Two, processing methods Thread processing, with the development of science and technology, in addition to the use of ordinary machine tools processing, often CNC machine tools. In this way, the processing difficulty of the processing thread can be reduced, the work efficiency can be advanced, and the quality of the threading can be ensured. CNC machine tool thread processing, commonly used G32, G92 and G76 three instructions. The G32 instruction is used for processing a single threaded programming task, and the use of complex procedures; instruction G92, can achieve a simple thread cutting circle, the program editing is greatly simplified, but must request the workpiece blank after roughing. Instruction G76, which overcomes the defects of instruction G92, the workpiece can be process