八路韵乐调音台使用图解-----接口中英对照（Eight Yunle mixer using graphical interface, in Chinese and English）.docVIP

八路韵乐调音台使用图解-----接口中英对照（Eight Yunle mixer using graphical interface, in Chinese and English） Eight Yunle mixer diagram When the initial contact of the mixer, it will be very easy on the panel, the number of brightly coloured knob and a push rod scare. First, lets take a look at the panel on the left. In fact, the push and the knob on each side of the left mean the same thing. So you just need to focus on how a channel works and you can master it all. The mixer has less channels input control 4 road and 8 Road, 96 road and the maximum number of even more. The console has 8 input controls, and we only take one of them to explain the function of each part. 1.MIC: microphone input interface The microphone input via the XLR socket, acceptable balanced or not low level, the use of professional coil, capacitive or ribbon type low impedance microphone, if you use a non balanced microphone to try to use the shorter the better the microphone line, in order to avoid the interference of noise. 2.LINE: high level input interface High level input usually via TRS 1/4 three-dimensional Phone Jack or TRS 1/4 Mono Phone Jack into the microphone, the audio signal can be outside through high level input to the mixing machine, Phone stereo Jack input is balanced, the same as XLR, but if you have to use the non balanced equipment, available Mono Phone Jack, the connection can not be too long (less than 4.5m). 3.LINE -20DB: attenuation of 20 dB key Press this key to reduce the input level by 20 decibels. The utility model is mainly used when the environment noise is large, the equipment level noise is large or the level is too high. With this key, all frequencies of the audio input signal are attenuated to achieve the purpose of filtering smaller volume noise or electrical noise. Sometimes the phenomenon of high level signal input, such as attenuation, the control range will greatly reduce the attenuator, can only slide in a very small area, due to the volume of output control is difficult