dos下更改ip地址.docVIP

DOS环境下更改IP/DNS/网关地址 编辑:fufei |?2008-03-17 13:44:58 | 来源:youPC.cn |??匿名投稿??加入会员??收藏本文?[3486]  Tags： 详细说明：netsh　　netshinterface　　interfaceip　　interface?ip?dump?　　　netsh命令使用集锦1、显示当前系统的网络配置脚本我们在?Windows?2000?的?cmd?shell?下，输入?netsh就出来：netsh?提示符，输入?int?ip?就显示：interface?ip然后输入?dump?，我们就可以看到当前系统的网络配置：#?----------------------------------#?接口?IP?配置#?----------------------------------pushd?interface?ip#?208Alan?的接口?IP??配置set?address?name=208Alan?source=static?addr=192.168.16.51?mask=255.255.255.0set?address?name=208Alan?gateway=192.168.16.5?gwmetric=1set?dns?name=208Alan?source=static?addr=218.201.4.3?register=PRIMARYadd?dns?name=208Alan?addr=218.201.17.2?index=2set?wins?name=208Alan?source=static?addr=nonepopd#?接口?IP?配置结束也可直接输入:netsh?interface?ip?dump?address或netsh?int?ip?dump2、导出配置脚本(在F：盘创建一个名为interface的文本文件）netsh?-c?interface?ip?dump?f:\interface.txt或netsh?-c?int?ip?dump?f:\interface.txt3、导入配置脚本（复制文件interface.txt，重命名为interface2.txt，作相应修改）netsh?-f?int?ip?dump?f:\interface2.txt4、更改配置C:\Documents?and?Settings\Administratornetsh?int?ip?set?address用法:?set?address?[name=]string???????[[source=]dhcp?|????????[source=]?static?[addr=]IP?address?[mask=]IP?subnet?mask]???????[[gateway=]IP?address|none?[gwmetric=]integer]参数:??????标记???????????值??????name?????????-?接口名称。??????source???????-?下列值之一:?????????????????????dhcp:?对于指定接口，设置用?DHCP?配置?IP???????????????????????????地址。?????????????????????static:?设置使用本地静态配置设置?IP?????????????????????????????地址。??????gateway??????-?下列值之一:?????????????????????IP?address:?您设置的?IP?地址的指定默认???????????????????????????????????网关。?????????????????????none:?不设置默认网关。??????gwmetric?????-?默认网关的跃点数。如果网关设置为?none，则?????????????????????不应设置此字段。??????只有在?source?为?static?时才设置下列选项:??????addr?????????-?指定接口的?IP?地址。??????mask?????????-?指定?IP?地址的子网掩码。说明:?用来将?IP?地址配置模式从?DHCP?模式改为?static，或从?static??????模式改为?DHCP。用静态?IP?地址在接口上添加?IP?地址，或添加??????默认网关。示例:???????set?address?name=本地连接?source=dhc