band-passfilter design techniques for high …（band-passfilter设计技术对高u2026）.pdfVIP

Application Report SBAA195– February 2012 Band-Pass Filter Design Techniques for High-Speed ADCs Vinod Paliakara, Sourabh Gupta High-Performance Analog Products ABSTRACT Several well-known methods exist for designing passive inductor-capacitor (LC) filters with resistive load terminations. However, when LC filters are used to drive the analog input pins of a high-speed analog-to- digital converter (ADC), special consideration must be given to the ADC input impedance. Not accounting for the ADC input impedance often results in a filter design that does not meet the original target specifications. This discrepancy is especially true with wide bandwidth filter designs, which are becoming increasingly common in wireless communication infrastructure applications. This application note describes the methodology to absorb the ADC input impedance into the filter design so that the original filter specifications are met up-front, resulting in a first-pass filter design. Contents 1 Introduction 2 2 Step 1: Getting Key Filter Specifications 3 3 Step 2: Designing the Filter With a Resistive Load (Using Generic Tools) 3 4 Step 3: Designing the Filter with the ADC Input Model (Using the TI-TINA Tool) 5 5 Conclusion 9