电力论述题（Power problem）.doc

电力论述题（Power problem） Six, discussion questions (10 points per subject, a total of 20 questions) 1 (La3F3002) what is the cause of the malfunction of the load regulating device on the transformer? Answer: there is a cause of the malfunction of the load regulating device: (1) the operation power supply voltage disappears or is too low. (2) the motor winding is broken and burned, and the starting motor is out of pressure. (3) poor contact between interlocking contacts. (4) drive mechanism tripping and pin fall off. 2 (La3F4004). The advantages of metal oxide arrester protection performance are discussed Answer: metal oxide arrester and general valve FZ and FCZ magnetic blow arrester compared to the following advantages: (1) metal oxide arrester has no series gap, fast action, flat volt ampere characteristic, low residual voltage and no wave cut. (2) the metal oxide valve plate has the advantages of large flow capacity, small size, small quality and simple structure. (3) continuation minimum. (4) the volt ampere characteristic is symmetrical, and the same is true for positive and negative overvoltage protection. 3 (La3F3006). What is the function of measuring insulation resistance? Answer: measuring insulation resistance of electrical equipment is the simplest auxiliary method to check its insulation state. From the measured insulation resistance, it can be found that the conductive parts of the electrical equipment affect the foreign matter of the insulation, the insulation is partly or integrally damp and dirty, the insulation oil is seriously deteriorated, the insulation is broken down and the heat aging is serious. 4 (La3F4007). What are the side discharges? What are the factors that affect the discharge voltage along the surface? Answer: in actual insulation structures, there is often a gas or liquid dielectric around the solid dielectric, such as a line insulator surrounded by air, an oil immersed transformer, and a solid insulator filled with transformer oil. In