复印机的保养使用常识(Maintenance and use of copiers).docVIP

  • 4
  • 0
  • 约8.49千字
  • 约 7页
  • 2017-07-24 发布于河南
  • 举报

复印机的保养使用常识(Maintenance and use of copiers).doc

复印机的保养使用常识(Maintenance and use of copiers)

复印机的保养使用常识(Maintenance and use of copiers) Maintenance and use of copiers In the process of copying machine, optical circuit system, mechanical system, the system of it, in addition to normal wear, but also by the copier from inside and outside the dust and debris damage caused by copy quality variation and operation failure. Maintenance is mainly for the copier optical, development, charging, transfer, separation, elimination of electricity, electrodes, fixing, transfer and other parts and toner recycling system for cleaning or local adjustment. In general, impurities in the optical system result in heavier copies of the bottom, black spots, and impurities in the mechanical system causing problems such as paper jam and photocopies. Therefore, in our daily work, we should pay attention to the cleaning and maintenance of the copier. Usually, users can do the following: 1. Clean the cover board Exposure to various originals and hand touches will make the white plastic lining or conveyor belt black and lead to black spots on the edges of the photocopies. With cotton gauze dipped in some detergent, repeatedly wipe, and then wipe with water, and then wipe it. Note: do not use alcohol, ether and other organic solvents to wipe. 2. Glass cleaning of stage glass Since the stage glass is easily contaminated by the manuscript and hand, it is also easy to be scratched, so it should be regularly cleaned and maintained so as to ensure good copy effect. In the work, avoid direct contact with the table glass, if binding, should be on the original pins, pins, staples and other removed, and placed in a designated position. After the original change, must wait until the correction after the dry copy. When cleaning the table glass, avoid using organic solvent to wipe it. The coating is coated with a light transmitting coating and a conductive coating, which are insoluble in water and soluble in organic matter. 3 、 circuit system Because of the long time working under high pressure, the

您可能关注的文档

文档评论(0)

1亿VIP精品文档

相关文档