如何正确使用压力表（How to use pressure gauge correctly）.doc

如何正确使用压力表（How to use pressure gauge correctly） Various pressure gauges are applied to measure the pressure of no explosion, no crystallization, no solidification, and liquids such as liquids, vapors, and gases that do not corrode steel alloys. Stainless steel membrane pressure gauge price Operating temperature: -40 ~ 70 DEG C, relative temperature is not greater than 85% Instrument execution standard: GB/T1226-2001 Structure principle: the measuring system of instrument consists of joint, spring and transmission mechanism. Indication of meter reading by pointer. The correct selection of pressure measuring instrument mainly includes determining the pressure type instrument (such as measuring the differential pressure gauge pressure is still still negative pressure or absolute pressure), range, pressure measurement unit, resolution, accuracy and sensitivity, size and the need for communication and it has the functions such as indicating, recording, and regulation alarm. Main basis for selection: 1. process requirements for measurement, including range and accuracy. In the static test (or slowly changing) under the condition that the maximum value of full scale of the selected gauge 2/3 provisions of the measured pressure; the pulse (fluctuation) under pressure, the maximum pressure gauge with 1/2 of full scale of the measured pressure. The accuracy levels of the common pressure measuring instruments are 0.25, 0.4, 1, 1.5 and 2.5, and so on, which should be selected from the requirements of the accuracy of the production process and the most economical point of view of the 5. The maximum allowable error of the instrument is the product of the instruments range and the percentage of accuracy. If the error exceeds the accuracy of the process, a pressure meter with higher accuracy should be replaced. 2. the nature of the medium to be measured, such as the state (gas, liquid), temperature, viscosity, corrosion, degree of contamination, flammable and explosive degree, etc..