泵送混凝土温度裂缝的成因和防治0（Cause and prevention of temperature crack in pump concrete 0）.docVIP

泵送混凝土温度裂缝的成因和防治0（Cause and prevention of temperature crack in pump concrete 0） The pumping concrete can not only improve the construction performance of concrete, but also can reduce the shrinkage, prevent the cracks, improve the impermeability and improve the durability of the thin-wall reinforced structure. But some engineering shows that pump concrete strength is insufficient, coagulation abnormalities have occurred, especially the widespread cracks, affect the structure of impermeability and durability to a certain extent, we should pay enough attention to the. This paper focuses on analysis of the causes of temperature cracks, to find ways to prevent cracks. 1. causes and characteristics of temperature cracks Temperature cracks often occur in the mass concrete surface or in the concrete structure where the temperature difference is great. After pouring concrete in the hardening process of cement hydration produces a lot of heat of hydration, resulting in internal temperature rise sharply, and the concrete surface cooling rapidly, forming larger temperature difference between inside and outside, large temperature difference caused by internal and external expansion and contraction degree is different, the concrete surface tensile stress, tensile strength when the stress exceeds the ultimate strength of concrete, concrete surface meetingcreation crack, the crack occurred late in concrete construction. The direction of temperature cracks usually does not have a certain rule, and the large area structure cracks are usually Criss crossing. The width of fracture is different, which is affected by the change of temperature. It is wider in winter and narrower in summer. 1.2 influencing factors and prevention measures The temperature inside the concrete is related to the thickness of concrete and the variety and dosage of cement. The thicker the concrete, the greater the amount of cement, the higher the hydration heat, the higher the internal temperature, the greater th