修理前的准备工作（Preparation before repair）.doc

修理前的准备工作（Preparation before repair） First, the preparation before the repair work 1: before fixing the TV set, we must understand the circuit principle, the signal flow, the working voltage of each point in the normal state and the waveform of the repaired TV set. Prepare the drawings of the machine to be repaired, including electrical schematics, printed circuit boards, etc.. 2: before opening the back cover, you must first understand the shell structure of the machine, so as not to do improper damage to the chassis. 3: prepare the necessary measuring instruments, tools and spare components, the general conditions of the better repair department, with oscilloscopes and other instruments. 4: before the overhaul, we should carefully understand the damage to the TV, the users acceptance of the conditions and voltage fluctuations in the grid. This is very effective for correct judgement. I hope you will not ignore it! Two, maintenance matters needing attention In order to ensure the machine gas and life safety, avoid the damage caused by improper operation, the expansion of the fault range, and even electric shock accident. Therefore, we should pay attention to the following items during the overhaul: 1, now domestic or imported TV are using switching power supply, the power supply is directly from the 220 AC power rectifier and therefore, the movement may be overall live or partial electrification. In the overhaul, if the operation is not proper, it may cause electric shock or damage to the instrument and the expansion of the fault range. Therefore, in the maintenance, it is strongly recommended that the 1:1 isolation transformer be used in the power supply. 2: maintenance site environment must be kept safe, neat, bright, ventilated, maintenance personnel must be away from the water pipe, air conditioning pipe and other grounding devices, and prohibit the use of metal chairs. In this way, if an electric shock accident occurs, it can also detract from the bad degree an