局域网加速绝招（LAN acceleration trick）.docVIP

局域网加速绝招（LAN acceleration trick） Believe that every enterprise is always dealing with LAN, fast and stable LAN access speed can improve office efficiency, which is the requirement of each enterprise. But many times you cant do it, and sometimes local networks are inaccessible or very slow. In fact, as long as we find out the cause of the slow speed of local area network, and make some modifications and settings, the LAN speed will be greatly accelerated. Jeanne LAN Suman behind It may be easier to troubleshoot network faults, but the network is open and slow down, and it may be troublesome to work it out. Causes the local area network speed to slow down mainly has following several points: The broadcast storm has slowed the network. All devices in the same network are located in the same broadcast domain, and all broadcast messages are broadcast to each port of the network. At the same time, only one broadcast message can be transmitted over the network. The number of computers in the network increasing, the number of broadcast packets will increase rapidly, the broadcast time taken will be more and more, when the broadcast packet a certain extent will affect the normal transmission of information on the network to the network transmission efficiency, resulting in decreased, even will cause network paralysis. In addition, some popular Internet viruses and hacker attacks can also cause broadcast storms. Network equipment and equipment failure caused slow network speed. If the computer network card or other network equipment physical damage, damage of the card will not stop to switch to send a large number of data packets, which have a lot of data packet is invalid, a lot of useless packets will cause the information transmission delay caused by network congestion, resulting in the broadcast storm, resulting in slow speed lan. This can be used to troubleshoot network device failures, where network cards, hubs, and switches are the most vulnerable devices. It should be