建筑构造与视图（Building structures and views）.doc

建筑构造与视图（Building structures and views） 1, masonry mortar strength grade is determined by its compressive strength, can be divided into (ACDE) and other grades. A, M15, B, M12, C, M7.5, D, M5.0, E, M 2.52 and column method drawings are written in (DE). A. section notes, B. elevation note, C. plane note, D. section note, E. list, note 3, and the basis is divided into (BD) by the form of structure. A. unreinforced extended foundation, B. raft foundation, C. reinforced concrete foundation, D. pile foundation, E. expansion foundation 4, and brick masonry quality requirements (ABCD). A. horizontal and vertical B. C. and D. on masonry mortar full joint firm E. under 5, according to open the window on the way can be divided into (ABCDE). A, B, sliding window casement window D, C, suspended fundamental component, windows 6, windows E fixed housing: (BCDE) A, B. based C foundation factors, D, E, stair doors and windows, roof construction has 7 Effects: (ABCD) A, human factors the effects of B and C, the influence of material and technical conditions of natural climatic conditions, economic conditions affect the effect of D E and energy saving effects of 8 and beam effects (ACD). A, strengthen the overall housing B, improve the bearing capacity of C, reduce the uneven settlement of foundation wall cracking caused the increase of D, E, the wall stability floor appearance 9, FRWS according to the nature of the use of no wall (DE). A. seismic joint seam of D. E. 10, dividing joint construction joints according to construction mode of settlement of C. B. stretching, types of reinforced concrete slabs with (CDE) A, B, rib beam floor waffle slab C, cast-in-place reinforced concrete floor D, precast reinforced concrete slab, precast slab E, 11 the following options, not the content of the expression profile of the building is (DE). A, the beam and slab, stair, roof structure, location, B floor, balcony, landing, the elevation of C exterior wall surface decoration practices D, window