新建筑面积解释（New construction area explained）.docVIP

新建筑面积解释（New construction area explained） First, the main part of housing construction 1, single storey building Building construction area should be according to the walls above the plinth structural peripheral horizontal area calculation. The height of a single storey building at 2.2m and above shall be calculated in full area. The floor space shall be calculated at 1/2 below 2.2m. One is that part of the external walls of buildings and outdoor ground or water contact parts of wall thickening (Fig. 1); height refers to the indoor floor to the roof (the lowest) vertical distance between the elevation of the structure. Figure 1 plinth A single storey building with local floor, local floor two floor and above the floor, a retaining structure should be according to the level area of the external envelope calculation, no envelope should be according to the structure of the floor horizontal area calculation. Floor height in 2.2m and above should be calculated in full area; storey height is less than 2.2M, 1/2 area should be calculated. Enclosure refers to the walls, doors, windows and so on surrounding the building space. 2, multi-storey buildings The floor area of a multi-storey building shall be calculated according to the different heights and boundaries. The first layer should be according to the walls above the plinth structural peripheral horizontal area calculation; the two layer and above the floor should be according to the exterior structure of peripheral horizontal area calculation. Floor height in 2.2m and above should be calculated in full area; storey height is less than 2.2M, 1/2 area should be calculated. Here I would like to refer to this algorithm as the height limit algorithm. Storey height refers to the vertical distance between the upper and lower two floor (or ground to floor) structural elevation, wherein the top floor height is the vertical distance between the floor and the roof (lowest) structural elevation. 3, single (multi) layer of buildings