金属切削刀具（Metal cutting tools）.docVIP

金属切削刀具（Metal cutting tools） 1. when turning, the spindle speed increases, and then increases. (AB) A cutting speed, B feed speed, C feed, D cutting depth 2. in the cutting process, the main movement is. Its characteristic is. (cut the movement of pieces, fast, with only one) 3. when boring the boring machine, its main movement is. (cutter rotation) 4. when the speed ratio of the wheel rack and the feed box on the lathe is fixed, if the spindle speed becomes faster, the feed speed increases. (x) 5. broaching machine, the machine without feeding movement. (V) 6. when machining, there must be a movement of feed. (A) A bevel plane, B mill, excircle, C milling, helical gear, D gear hobbing 7. when cutting, there must be two feed movements. (B, D) A bevel plane, B grinding, excircle, C milling, straight tooth, D hobbing 8. after adjusting the cutting parameters, the cutting width and depth of the cutting process are changed. (C) A turning, B planing, C milling, D boring 9. all machine tools have main movement and feed motion. (x) 10. in cutting motion, a machine tool with intermittent motion characteristics is provided. (B, F) A B C D slotting machine lathe grinder boring broaching machine E F planer 11. in cutting motion, a machine tool with reciprocating characteristics is available. (C, F) A B C D slotting machine lathe grinder boring broaching machine E F planer 12. any surface shape of Chengdu can be thought of as being formed along the course of motion. (bus, wire) 13. cutting parameters include, and. (cutting speed, feed rate and cutting depth) Two 、 tool knowledge 14. the main deflection angle of the tool is measured in the plane. (A) A base plane, B cutting plane, C orthogonal plane, D feed plane 15., the tool stay angle is the angle between. (tool feed direction, main cutting edge) 16. cutters are usually made up of parts and parts. (cutting, clamping) 17. the structural forms of turning tools are: several kinds. (integral type, welding type, machine clamp, heav