cad自学网笔记（CAD self-study network notes）.docVIP

cad自学网笔记（CAD self-study network notes） First, select three commonly used methods: 1) drag the window from left to right and select the box to select; 2) drag the window to the right and left, and select as long as you are exposed to the object. 3) pick Two, mouse operation: 1) the middle key rolls outward to enlarge the window, and then rolls inside to reduce the window 2) press the middle button two times, equal to the window all show 3) press and hold the middle button to move the window 4) press the right button to correspond to the keyboard return key Three 、 drawing tools 1) straight line (L): you can draw a straight line by specifying two points on the screen 2) rectangle (REC) 3) arc (ARC) 4) circle (C) 5) line: for mark (not important) 6) spline curve: (SPL) with the left key to determine the points after the three return, the first break, the starting point of the second tangent direction, the third end tangent direction. 7) ellipse (EL): not commonly used, first give the long axis of the long axis, and then give the half of the short axis, or to central painting, the length of each axis to half 8) elliptical arc: not common, used to draw elliptical arc 9) point (P) Four. Drawing frame When the drawing does not need to be bound, the size of the A and C in the picture is changed to the size of E. (GB/T, 14689-93) Five. National standard reading: GB 4457.4 - 84 The national standard 4457th times four, 1984 Tip: half of the video, halfway through the solution - click to view Unable to watch tutorial. Please install FLASH player local download Modify toolbar: Delete (E) full name (erase) Used to delete objects, click delete, enter the ALL on the command line, that is, delete the drawing area, so the object; default to delete the selected object Copy (CO) full name (copy) Used to copy objects by default to copy the selected object; specifies the base point to move the copied object to another location. The actual size can be moved: in three cases, only copy once