CCNP-BSCI实验指导书.docVIP

实验目录 实验一、配置Eigrp 验证，汇总································2 实验二、配置ospf验证，汇总，虚链路··························12 实验三、配置Ospf与Eigrp的路由再发布························24 实验四、配置Bgp·············································34 实验五、配置PIM auto-rp······································53 实验一、配置Eigrp 验证，汇总 环境：三台路由器串口相连，其它接口配置如图 要求：1.配置EIGRP关闭自动路由汇总 2.在R1的三个LOOP口进行EIGRP手工路由汇总 3.R2、R3配置EIGRP接口密文验证 4.验证并测试结果 步骤一： 配置三个路由器接口使其连通。 R1的配置 R1(config)# interface Loopback0 R1(config-if)# ip address 30.1.1.1 255.255.255.0 R1(config)# interface Loopback1 R1(config-if)# ip address 30.1.2.1 255.255.255.0 R1(config)# interface