相机维修（Camera maintenance）.docVIP

相机维修（Camera maintenance） Digital camera common fault example maintenance Digital cameras are highly sophisticated electromechanical products, which can cause malfunction if they are improperly used and defective. Here to talk about digital cameras of all kinds of failures and solutions. 1., fault phenomenon: LCD screen display, image distortion, partial color, blurred, confusion, and even black screen. Both photography and photography are like this. Digital cameras were common in the last few years. Such failures are the most frequent, I have encountered CANON, A70, A75, S1, IS, SONY, F717, NIKON, 5700 models such failures. Cause of failure: CCD problem. These fault camera are common features with SONY CCD, a long time after CCD internal lead desoldering failure. Solution: directly looking after sale. This kind of fault is repaired free of charge. Each manufacturer has a list of faulty cameras. You can first check your camera list on the Internet, and if so, the maintenance is free. Cameras that are not on the list have to pay for themselves if they are to be repaired. The maintenance method is to replace the CCD, as if some maintenance department can fault CCD on the glass package to remove, re welding the lead and then seal back. 2. Fault phenomenon: the picture is full of stripes, overexposed, shooting normal. Fault reason: shutter damage, always open and not closed. Or the shutter line is broken. Solution: check the shutter assembly and cable, usually cable damage. This kind of fault with Samsungs camera is the most frequent, do not believe everyone BAIDU a cross stripes will know. Almost all of Samsungs cameras may have this kind of trouble because the wiring of the shutter component is broken. I do not understand, Samsung you can not change the quality of a good cable ah, and the problem has not been changed for a few years, and even now the blues series have this problem, speechless. For such failures, Samsung officials say it is free of charge, but in some s