空压开关（Air pressure switch）.docVIP

空压开关（Air pressure switch） In the power system, the selection of leakage protection devices should take into account a variety of factors. First is the correct choice of leakage protection device leakage current. In the bathroom, swimming pool, tunnel and other dangerous places, should use high sensitivity, fast leakage protection device (the action current should not exceed 10mA). If the installation place has the person receiving an electric shock accident, can get other peoples help in a timely manner from the power supply, then the leakage protection device operating current can be greater than get rid of current; as the fast protective device, the working current may according to ventricular fibrillation current selection. If it is a pre - protection, that is, the total protection in front of the protection, the action current can exceed the ventricular fibrillation current. If the work place is not helped by other people, the power supply shall not exceed the current in order to get rid of the power supply in time. When the electric shock may lead to serious two accidents, the action current 6mA shall be used as a fast leakage protector. In order to protect children or patients, fast current leakage protection devices with action current 10mA should be adopted. For class I hand held power tools, the quick leakage protection device shall be installed at 10 to 30mA of the operating current, depending on the risk of the workplace. The choice of action current should also consider the possibility of misoperation. The protector shall be able to avoid the unbalanced leakage current of the line without action, and shall also be able to operate without any electromagnetic interference at the installation position. The actual conditions of the protector manufacturing should also be considered in selecting the action current. For example, due to the action of pure electromagnetic products, the current is difficult to achieve less than 40mA, but should not pursue excessiv