压光机设计.docVIP

摘 要 造纸业是一个传统的重要行业，随着社会的进步，科技的提高，人们通过一系列机器设备的更新替换和加工工艺的改良来不断提高纸张的质量，来满足需求。而压光机就是用来提高纸张光泽度、平滑度、紧实度的一种机器设备。所以对于压光机设计这个课题的研究是非常有意义的，而能否提出设计出合理的压光机方案将直接影响制品的质量和性能好坏。 本此毕业设计：FM1600直立式三辊压光机设计，通过查阅相关资料和到相关生产企业参观实训为基础，对压光机进行了比较完整的系统设计工作和关键零件的工程图纸绘制工作，主要内容包括：第一章 对压光机的性能原理、组成、分类以及发展史进行了综述及分析：第二章进行了压光机辊筒，机架体等这样一些结构装置分析与设计，第三章则是对压光机设计理论的介绍设计中要求对辊筒挠度进行补偿的措施。第四章是压光机一些系统的设计。第五章则主要是列举设计中要求对辊筒挠度进行补偿的措施。 关键词：压延；传动；加热；挠度，电气 Abstract Paper industry is an important traditional industry, with the progress of society and the improvement of science and technology, improvement of people through a series of equipment replacement and processing technology to continuously improve the quality of paper, to meet the demand. Calender is a kind of machine equipment used to improve the gloss, smoothness and compactness of the paper. Therefore, it is very meaningful to study the subject of calender design, and whether we can design a reasonable calender scheme will directly affect the quality and performance of the product. This is the design of calender in access to a large number of relevant literature, and under the guidance of a mentor, because domestic on the calender design precedent is not too much, so in many parameters it is difficult to find a standard or obtained by the relevant formula. Most of the parameters of this design are given by instructors through data given in the actual production of the factory. This thesis is divided into five chapters, the first chapter narrated the calender performance principle, composition, classification and development history: the second chapter introduces the calender roller, a machine frame body such as structure device, the third chapter is the design of calender design theory in the required compensation roller deflection measures. The fourth chapter is the calender system design, mainly enumerates the design request to compensate the roll deflection. The fifth chapter mainly lists the design requirements of the roller deflection compensatio