前置放大（Preamplifier）.docVIP

前置放大（Preamplifier） Pre amplifier Preamplifier preamplifier refers to amplify the audio (AUX, MIC) signal to the input range that the power amplifier can accept. Catalog function Form Effect Distinguish and apply single gain pre stage Input impedance matching Selection method forum method Translation methods Related concepts output voltage of sound source Amplifier input sensitivity Model function of front amplifier Form Effect Distinguish and apply single gain pre stage Input impedance matching Selection method forum method Translation methods Related concepts output voltage of sound source Amplifier input sensitivity Pre amplifier model Expand edit this section function The preamplifier has two functions: one is to select the required sound source signal, and the other is to pre amplifier Zoom to rated level; two is to carry out various sound quality controls to beautify the sound. Edit this paragraph The basic components of preamplifier include sound source selection, input amplification and sound quality control circuit. Edit this paragraph The function of the audio source selecting circuit is to select the required sound source signal and send it to the back stage Close other audio channels simultaneously. The input amplifier is used to amplify the sound source signal to the rated level, usually around 1V. Quality control is the role of the frequency characteristics of the sound system can be controlled to achieve high fidelity sound; or according to the listeners hobby, Decorate and beautify sounds. Edit this paragraph, differentiate and apply The difference and application of power amplifiers, line amplifiers and pre amplifiers are amplified by the preamplifier input signal, For example, the sound signal picked up by a microphone, because it is relatively weak, needs to be amplified to a certain level before it can go to other levels. Usually, the preamplifier has a higher voltage gain that amplifies the small signal to the standard level. The line amplifier i