端曲面齿联轴器的创成原理及设计 - 中南大学学报.PDF

第 47 卷第 11 期 中南大学学报( 自然科学版) Vol.47 No.11 2016 年 11 月 Journal of Central South University (Science and Technology) Nov. 2016 DOI: 10.11817/j.issn.1672-7207.2016.11.013 端曲面齿联轴器的创成原理及设计 林超，赵相路，曾东 (重庆大学 机械传动国家重点实验室，重庆，400044) 摘要：根据联轴器工作原理，结合空间坐标变换理论、共轭曲面求解理论及正交非圆面齿轮副传动原理，提出端 曲面齿联轴器这一新的结构形式，建立端曲面齿联轴器求解的共轭坐标系，推导端曲面齿联轴器的端曲面参数方 程，生成端曲面；结合端曲面齿齿盘的几何参数设计理论，采用“共轭截线投影法”新型齿面生成方法，通过 solidworks 软件对端曲面齿齿面进行几何求解，获得端曲面齿联轴器的连接齿面及十字轴式端曲面齿万向联轴器 的三维实体模型；将端曲面齿联轴器应用于冶金等工程设备中，验证端曲面齿联轴器几何设计方法的正确性和在 工程应用中的可行性。 关键词：端面齿形；共轭曲面；联轴器；三维建模 中图分类号：TH133.4 文献标志码：A 文章编号：1672−7207(2016)11−3707−08 Constructing principle and design of curved-face gear coupling LIN Chao, ZHAO Xianglu, ZENG Dong (The State Key Laboratory of Mechanical Transmission, Chongqing University, Chongqing 400044, China) Abstract: According to the working principle of coupling, spatial coordinate transformation theory, solving theory of conjugate curved surface and the drive principle of curved-face gear, the new structure of the curved-face gear coupling was put forward. The conjugate system of the curved-face gear coupling was established. The parameter equation of the curved-face of the curved-face gear coupling was deduced. According to the geometrical parameter design of curved-face gear coupling theory, the method of conjugate cutting line projection was used to generate the tooth surface. A geometrical mathematical model was built to solve the curved-face gear coupling through the solidworks, which can get the tooth surface and of the curved-face gear coupling 3-D entity model. The a