“conefor inputs” is a custom-made gis extension for arcgis 9.pdfVIP

Conefor Inputs “Conefor Inputs” is a custom-made GIS extension for ArcView 3.x, ArcGIS 9.x and ArcGIS 10 developed by Jeff Jenness Enterprises () specifically for the Conefor Sensinode software (CS). The instructions for installation and use of the extension provided below have also been included as part of the CS user’s manual. CS software and manual can be freely downloaded from . “Conefor Inputs” allows easily obtaining from a theme in ArcGIS (e.g. shapefile) both the node file and the connection file (as a distance file) directly in the format required by CS. The distances in the connection file calculated by this extension are edge-to- edge Euclidean (straight-line) between all the features (e.g. patches) of a theme, with the option to analyse either all features or only those within a specified distance (see below). The node and distance files provided by this extension are directly usable (with no change) in CS. Installation For ArcView 3.x 1) Begin by placing the conefor_inputs.avx file into the ArcView extensions directory (../../Av_gis30/Arcview/ext32/). This file is available for download at or /arcgis/conefor_inputs.htm. 2) After starting ArcView, load the extension by clicking on File -- Extensions… , scrolling down through the list of available extensions, and then clicking on the checkbox next to the extension called Conefor Inputs. 3) The Conefor Inputs tool will appear in your View button bar as a button with a “D” on it: For ArcGIS 9.x 1) Make sure ArcGIS is closed. 2) Install the Conefor Inputs extension by double-clicking on the file “Conefor_inputs.exe”, which will be located in the “Extensions GIS\ArcGIS 9.x” folder (within the folder where you installed CS, typically C:\Program f