shockwaveflash控件详解（就控件详解）.docVIP

shockwaveflash控件详解（就控件详解） ShockwaveFlash control detailed (a) - property (turn) Attribute: 1.AlignMode (read write) Syntax: AlignMode, As, Long Explanation: alignment, linkage with the SAlign property. When the length width ratio of the control is not consistent with the movie and the WMode is not ExactFit, the location shown in the control (not enlarged) is adjusted by the property. The property value is made up of flag bits. As shown, the corresponding alignment of the property value (binary) is set to 1, and the corresponding alignment direction is set. Property values and the corresponding alignment. The binary number in the back bracket. 1: left justify (0001) 2: right justified (0010) 4: Top aligned (0100) 8: bottom alignment (1000) You can also combine various alignments to mark two or more bits at 1, that is, add these four basic values together. For example, simultaneous left justify and top aligned, and attribute value is set to 5 (0101). Example: set the right alignment of the movie: Movie.AlignMode = 2 2.SAlign (read write) Syntax: SAlign, As, String Explanation: aligned mode (linkage with AlignMode). When AlignMode When the bits representing the alignment patterns are set 1, the SAlign value is set accordingly The combinations of the characters L, Left, T (Top), R (Right) and B (Bottom). The order of L, T, R and B remain unchanged. Example: set the film for left and top alignment: Movie.SAlign = LT 3.BackgroundColor (read write) Syntax: BackgroundColor, As, Long Description: the background color of the film (linked with BGColor). (* * 65536 with red green blue color value calculation 256). The RGB color range (0-255). The default movie background color is -1. If the film is set with a background color or with pictures as the background, then it is not possible to see how the change in the value of the property affects it. Example: set the background color to blue: Movie.BackgroundColor = 255 4.BGColor (read write) Syntax: BGColor, As, String Description