电磁式互感器（Electromagnetic transformer）.docVIP

电磁式互感器（Electromagnetic transformer） Reference electrical formula A formula: Capacity divided by voltage, whose quotient multiplied by six divided by ten. Description: apply to any voltage level. In daily work, some electricians only involve the calculation of rated current of transformers with one or two voltage grades. The above formulas can be simplified, the voltage level of the rated current calculation side derived formulas: Multiplying coefficient of capacity. The one or two known transformer capacity, quick protection fuse (commonly known as the fuse current value). B formula: Comparison of capacity and voltage between transformer and high voltage fuse. Distribution transformer low voltage fuse, capacity multiplied by 9 divided by 5. Explain： The correct selection of fuse is of great importance to the safe operation of the transformer. The correct selection of the melt is more important when the fuse is used as the transformer to protect the transformer at the high and low voltage sides. This is a problem frequently encountered and solved by electricians. Known three-phase motor capacity, its rated current Formula (c): capacity divided by kV number, multiply coefficient 76. Explain： (1) calculate the rated current of the three-phase motor formula is applicable to any voltage level. By the formula and the formula can illustrate the rated current of the motor capacity of the same voltage level is not the same, namely voltage kV number is not the same, the removal in the same capacity, the quotient is not the same, not the same quotient to take the same coefficient of 0.76, the current value is not the same. If the above formula is called general formula, the rated current can be derived for calculation formulas for calculating 220, 380, 660, 3.6kV voltage motor, a three-phase motor rated current is calculated by special calculation formulas, and the relationship between the direct current ampere kW capacity ratio, eliminating the capacity divided by the number