底框-抗震墙做法（Bottom frame seismic wall method）.docVIP

底框-抗震墙做法（Bottom frame seismic wall method） Some of the online experience for reference Pay attention to the problem of bottom frame structure The bottom frame masonry building load? In the bottom frame structure, the program automatically transfers the upper brick concrete load to the bottom frame, without adding it Using STAWE to calculate the end frame is, there is an option in the masonry aspect: 1. press PM main menu 8 algorithm; 2. finite element integral algorithm Here should choose 1!!! The finite element whole algorithm is not accurate to the bottom frame, only for reference (PKPM technician said) ^ sat - 8 calculation of bottom frame structure system, choose what? Citing information from the fifth issue of the PKPM new horizons, 2004: When calculating the brick masonry frame, the structural system parameters in the first item of SATWE have been invalid. Therefore, in the calculation of the bottom frame, the structural parameter in the first item of SATWE, no matter the frame or the frame shear structure, is useless. The bottom frame modeling problem: (1) when modeling, at the bottom of the concrete seismic wall, I input the concrete seismic wall and frame beam at the same time, is it correct? Where there is an opening, I will open the hole directly to the bottom of the frame beam. Is that correct? ? both seismic walls and frame beams can be input at the same time. The frame beam is used as the frame beam. If the bottom of the two storey frame, the middle layer can not input seismic wall. The entrance of the hole can be directly to the bottom of the frame beam. (2) assembly design parameters inside the floor at PM, the total information structure material should fill what? How should the main wall materials be filled in the material information? The parameters in the PM should be designed to fill the bottom frame, the material can fill in concrete structure. The material information in the SATWE-8 shall be filled with masonry. (3) after the calculation of SA