A Study Of Distortion In Hot Stamping Process - （失真的研究在烫印过程中,）.pdf

A Study Of Distortion In Hot Stamping Process UNIKL IPROM Muhamad Azuan Zaudin Muhammad Afzal Ahmad Muhammad Jamhuri Jamaludin Mohd Azmir Abidin Azman Senin Ahmad Zakaria 28 August, 2013 Background of Unikl Iprom • Established in 2003 , the Institute of Product Design Manufacturing (IPROM) is one of the very specialized engineering school under Universiti Kuala Lumpur. • Currently the Institute offers five (5) degree programmes leading to Bachelor of Engineering Technology (Hons ) in Product Design, Industrial Design, Tool and Die, Manufacturing Systems and Business Management. • Masters and PhD in Manufacturing (by research) • Hyperworks modules are used in courses such as CAE Driven Design, CAE in Sheet Metal Forming and Finite Element Method Unikl IPROM Presentation at the ATC 2013 A Study Of Distortion In Hot Stamping Process • Objective of paper  To present the results of simulation analysis on distortion generated by hot stamping process.  To compare the results with the actual automotive structural part. +++ • Statement of problem • Although distortion or springback is generally not a major issue in hot stamping process. But it does frequently occur in long and slender part. As such the ability to predict severity of this distortion before tool manufacturing is of prime important to tool makers.