企业安全文化的载体（Carrier of enterprise safety culture）.docVIP

企业安全文化的载体（Carrier of enterprise safety culture） Optimal design based on blade bending and skimming technique Li Yang, Ouyang Hua, Du Zhaohui (Turbine Laboratory, Shanghai Jiao Tong University, Shanghai 200030) mr.leeyang@163.com) Abstract: in the three dimensional viscous flow field numerical calculation program on the platform, using BP neural network and genetic algorithm to optimize the bending angle of the rotor blade of skewed swept blade technology of axial flow fan of the week, in order to further improve the aerodynamic performance of the fan gas. By comparing the impeller before and after optimization, it is found that the optimized blade exhibits obvious circumferential curving characteristics. The test results show that the total pressure and aerodynamic efficiency are increased by 3.56% and 1.27% respectively, and the stall margin is widened greatly by more than 36%, and the losses at the upper and lower ends are further reduced. Keywords: circumferential forward curved blade, artificial neural network, genetic algorithm, optimal design CLC number: TH432.1, document identification code: A Optimization, Design, Based, on, Skewed, and, Swept, Blade, Technique LI, Yang, OU, YANG-Hua, DU, Zhao-Hui (Turbomachinery, Laboratory, of, Shanghai, Jiaotong, University, Shanghai, 200030, China) Abstract: Based on a program for solving 3D viscous flow fields, an aerodynamic optimization design was conducted to the rotor blade (archetypal rotor blade) of an axial flow fan with back-propagation neural network and genetic algorithm. By skewed and swept blade technique, the optimized rotor blade having better aerodynamic performance is obtained. The results show that the optimized rotor blade is circumferential forward-skewed blade. Compared with the archetypal rotor blade, the total pressure rise and the total pressure efficiency of the optimized rotor are increased by respectively. Its stall 3.56% and 1.27% margin is greatly extended by more than 36%. At t