喷头墨盒堵头的处理（Treatment of cartridge head of nozzle）.docVIP

喷头墨盒堵头的处理（Treatment of cartridge head of nozzle） The inkjet printer cartridges plug their common processing method, a cartridge disconnection or plug CANON, HP and LEXMARK with the head of the ink cartridge appearing after the break or plug of CANON, HP and LEXMARK treatment with the head of the common features, in the upper side or the cartridge vent (and ink the hole in the hole), produced when used to fill ink cartridges, used to keep balance when using internal and external pressure. The normal sign of the nozzle is that the tissue is gently pressed at the nozzle to see the average ink seeping out of the ink. Otherwise, there is a broken line or plug, of course, do nozzle inspection can also see. Several causes of disconnection or plug are usually empty cartridges placed for a long time to run out of ink, the ink nozzle in the free state very easily when the ink dry and blocking; the addition of improper handling, such as outside the improper pressure adjustment, can also lead to breakage phenomenon. The processing method is: to find a clean glass (or other plane) a few drops of water, the cartridge head soaked in water for two to ten hours (depending on the severity of plugging, be careful not to wet contact), and then tissues scrub nozzle can smooth ink exudation is good. If there is only a slight exudation, the air can be blown or pumped into the ink box from the vent hole, and it is better to see the ink flowing out of the nozzle. As long as the nozzle or nozzle line is not damaged, this method can solve the problem of large department ink cartridge. There have been records of empty cartridges placed for nearly a year with this method. Two, EPSON printer cartridge plus ink after the plug treatment, how to determine the front of the plug and broken. Most people would have broken mistaken plug, if not in fact not months, or to remove the cartridge for a long time, generally do not block the head, mouth dry ink nozzle is generally not to change the nozzle. The