喷头清洗（Nozzle cleaning）.docVIP

喷头清洗（Nozzle cleaning） Jam, dont panic! Shooting plug to solve the By:2008-8-23 10:43:24 well Post Use of inkjet printer users may remember, when entering the summer, because the weather is hot and dry, after a period of time will often appear in the print head plug phenomenon, if not repaired, will affect the normal work, but for a long time will cause permanent plug, resulting in print the head is unable to repair and scrap it is in big trouble, because if you go to a nozzle to quickly catch up with the price of the new machine! I combined with years of practical work summed up a better solution to the inkjet printer plug, first let us briefly review the structure of inkjet printer ink: Head structure of ink-jet printer and ink-jet printer ink: common structure of ink jet head and the ink box machine and split two ways, one machine head structure of the ink box of ink ink and ink cartridge is exhausted, to be replaced together, such a structure is relatively more closely integrated, high reliability, but relatively high cost the separate structure; and the ink box of ink separation, ink ink cartridge can be exhausted after the replacement of the individual, can save the cost of a certain extent. Currently on the market most commonly used printers (such as EPSON, CANNON etc.) were double head structure: a black (or Photo) and a color ink jet ink. In the ink box, most black ink is independent, the other one is color ink box, the ink box for each color of some products are independent and can be replaced individually, the printing cost is further reduced. Two, the formation of inkjet printer plug: because the print head placed normal print homing after sealing or long time, excessive water evaporation, resulting in dry ink particle in fine print head tip, so that the ink cannot be ejected; or between different ink mixing, chemical reaction, usually often appear broken, missing colors blurred and even unable to print fault. Three, inkjet printer plug classification: ca