如何焊接电子元件（How to weld electronic components）.docVIP

如何焊接电子元件（How to weld electronic components） How to weld electronic components by benboye 10:59:00 | submitted date: 2009-8-18 classification: | visits: 412 How to improving the welding electronic components 12008-10-13 16:58 today as the two classes membership activities the excellent performance, below we give our members to release the knowledge of welding, the majority of members of Study hard, dont waste good youth. Also stressed that the welding method must be correct, otherwise, solder joints will not be pretty, the damage to the components will be great. AP AP The brand in electronic production, connection components need to be welded. The quality of welding has a great influence on the quality of manufacture. Therefore, the study of electricity in the production technology, we must master welding technology, training, welding basic skills. Which was a welding tool AP (a) electric iron. Electric iron is the most commonly used welding tool. We use 20W internal electric soldering iron. When the new iron is used, the electric heating is done, and the rosin is dipped into the rosin, and the soldering tin is contacted with the soldering edge of the soldering iron head, so that a tin is uniformly plated on the iron head. In this way, it is easy to weld and prevent the surface of the iron head from oxidation. If the old iron head is blackened by severe oxidation, the steel can be depressed and removed to the surface oxide, so that it can be plated again after being exposed to the metallic luster. Electric iron to use 220V AC power, use should pay special attention to safety. The following should be conscientiously done: Which was the 1. best use of electric iron plug pole plug. Make sure the casing is properly earthed. Which was 2. before use, should carefully check the power plug and the power line is damaged. And check if the iron head is loose. Which was the 3. to use iron, not hard hit. To prevent falling. When the soldering iron is too long, wipe it with cloth.