斜拉桥三维仿真分析（Three dimensional simulation analysis of cable stayed bridge）.docVIP

斜拉桥三维仿真分析（Three dimensional simulation analysis of cable stayed bridge） Cable-stayed bridge 3D simulation analysis of.Txt16 life, is a smile to face the reality, is watching over the obstacles in the future; life is to use the heart cut, cut out the green branches in the way of life; life is the face of confusion or darkness, the depths of the soul beans are bright and smiling lights. 17, the past and the future are far away from ourselves, the key is to seize the present and seize the present. /filname, cable-stayed, bridge, 1 Keyw, pr_struc, 1 /prep7 Define unit type Et, 1, beam4 Et, 2, link10 Define material properties MP, ex, 1,3.5e10 MP, prxy, 1,0.17 MP, dens, 12500 MP, ex, 2,10e15 MP, prxy, 2,0 MP, dens, 2,0 MP, ex, 3,1.9e10 MP, prxy, 3,0.25 MP, dens, 31200 MP, damp, 3,0.5 Define the real constant Define the real constant R, 1,25.6,5.546.133,16,1.6 R, 2,16,29.417,15.394,3.4,4.7 R, 3,54364.5162,6,9 R, 4,40213.3,83.3,5,8 R, 5,1,1/12,1/12,1,1 R, 6,0.012,0.012 cable! Create nodes and units Set up the main beam joint /view, 1,1,1,1 /angle, 1270, XM, 0 /replot *do, I, 1,59! This loop is used to create the half span joint of the main beam X=-174*2+ (i-1) *6, the leftmost x=174*2, the node x on the left of the x=0, and the distance between 6 Y1=-14! The width of the bridge is 28 meters, so the left node is -14 Y2=14 the width of the bridge is 28 meters, so the right node is 14 N, 3* (i-1), +1, x, build the main beam node 3* (i-1), and +1 as the node number N, 3* (i-1), +2, x, Y1... The following two lines establish the nodes on both sides of the bridge deck N, 3*i, x, Y2! The absolute master of programming that comes up with this modeling command, ha ha! *enddo! You can always create three nodes at the end, and then use the three nodes to duplicate 59 copies in the X direction, with a distance of 6 Setting up the main beam unit Type, 1 Real, 1 Mat, 1 *do, I, 1,58,1, the following loop establishes the main beam element of the bridge deck J=3* (i-1) +1 E, J, j+3 *enddo