浅谈闭路电视监控系统过电压防护(Discussion on overvoltage protection of CCTV monitoring system).docVIP

  • 2
  • 0
  • 约1.45万字
  • 约 10页
  • 2017-08-03 发布于河南
  • 举报

浅谈闭路电视监控系统过电压防护(Discussion on overvoltage protection of CCTV monitoring system).doc

浅谈闭路电视监控系统过电压防护(Discussion on overvoltage protection of CCTV monitoring system) With the social progress and the rapid development, increasing peoples lives, all the fields need to protect national production and life of the use of closed-circuit television monitoring system, closed-circuit television monitoring system is widely used in the campus, outdoor parking lot, large enterprises, mines, docks and other fields. These CCTV monitoring system front-end equipment, such as cameras, mostly installed outdoors, in a relatively open area, lightning risk is relatively large. Electronic equipment closed-circuit television monitoring system, such as the lightning overvoltage, power system operation over voltage, electrostatic discharge and electromagnetic interference is very sensitive, the monitoring system of equipment vulnerable to lightning damage caused by the closed-circuit television monitoring system paralysis. Therefore, in the design and construction of these CCTV systems, transient overvoltage protection (lightning protection) must be taken into account. Common problems with transient overvoltages (lightning strikes) Closed-circuit television monitoring system appears instantaneous overvoltage (lightning) common problems are generally three: 1. has been equipped with lightning rod, grounding grid, and adopted a joint ground, closed-circuit television monitoring system, equipment, why sometimes will be damaged by lightning? When the lightning current passes through the lightning rod and the ground network is introduced into the ground, the ground potential rises instantaneously. Assuming the lightning current I=50KA, grounding resistance R=1, potential U=I * R=50KA * 1 Omega =50KV. Because the joint grounding equipment potential also increased 50KV, and the power supply power line and the signal transmission line is from afar, distal potential is still in the zero potential, therefore the power input terminal equipment shell and equipment and the potential sign

您可能关注的文档

文档评论(0)

1亿VIP精品文档

相关文档