PKPM说明（PKPM instructions）.docVIP

PKPM说明（PKPM instructions） PKPM08 seminar notes Five more The 2008-5-19 New changes in version 08: Enlarged floors (broad floors) The flat modeling space is complementary to the SATWE interface New interface of construction drawing, automatic selection of reinforcement, automatic node Steel structure part: three-dimensional modeling, two-dimensional calculation Masonry recombination New features of the 2008 edition: Four types of modeling diagrams PM modeling Direct reading building (APM) modeling Read CAD, transit in CFG Complex spatial modeling (originally only in PMSAP, STS) Merge the modeling operation to achieve the three-in-one The original PMCAD1, 2, 3 merged into one Integrate the original PM2 floor operation, move to PM1 Automatic building of floor Automatically generate board thickness according to the information of this layer Semi-transparent floor display (optional) Transparent panel holes display Still can make the wrong layer board Can make any shape of floor board hole The panel can select its own width and shape, any section Uniform input of load All load uniform input Increased the load (three times before), and all the computing software can be read together The crane load is increased Modified strength Break layer model limit, flexible arrangement of components The unified shaft network of the whole building is changed to the independent axis network of each standard layer, cancel the alignment of the nodes in the floor, and merge the operation One axis can only be arranged with a beam limitation, a single axis can be bribed, and the interlayer beam can be cancelled Break the height limit of the floor, and adjust the height of the column by the height of the node Increase the jumping rod, the more the column, easy to be the pillar Any column can be connected to other layers Various inclined beam arrangement False inclined beam, The beam goes down, and what can be connected to what can be connected (to have a node) and the force can be passed witho