钢结构厂房监理细则（Supervision rules of steel structure plant）.docVIP

钢结构厂房监理细则（Supervision rules of steel structure plant） -28-28 - end anchorage parts should be reliable and the location should meet the design requirements. Observe and use a steel rod for inspection. D. Spot check for 10% of area and should not be less than 10m2. Check the pressure type metal plate installation should be smooth, straight, the surface should not have the construction residue and the dirt, the cornice and the wall bottom should be in a straight line, should not have unhandled wrong drilling hole. Observe inspection. E. Parallel degree of cornice and roof: 10 per cent in length a