车身修复（Body repair）.docVIP

车身修复（Body repair） 1. The basic model of passenger car includes (a backless body) (straight back body) (cabin back body) (short back body) (deformation by body) 2. Common metal material properties (plasticity) (elastic) (processing hardening) (thermal deformation) 3 safety glass for vehicles (tempered glass) (semi-toughened glass) (sandwich glass) (special purpose glass) 4 body damage sequence (bending and bending) (bending and bending) (fracture) (torsional deformation) (external swelling damage) 5. Corrective attention (which parts should be removed) (where the operation is intensified) (force size) (direction) (number) 6. Body measurement datum (water plane) (center surface) (zero plane) 7 coating restoration process (bottom material treatment) (plaster coating) (coating of atomic ash) (coating on the paint layer) (finishing after coating) The adjustment of the repairman includes (unpacking work hours) (changing work hours) (plastic working hours) (commissioning hours) (commissioning hours) (electrician hours) (spraying maintenance costs) 3. The method of repairing the deformation of the local depression of the body is (hammering method), (suction method), (inertia hammer method), (final modification of the plate). 4. To ensure the quality of welding technological parameters (voltage and current welding point), (distance) on the surface of the conductive mouth and welding, welding (direction and Angle), (protective gas flow), (welding speed). 5. The three elements of resistance spot welding are (extrusion), (current), (maintenance time). 6. Several common forms of welding deformation have (shrinkage deformation), (angular deformation), (bend deformation), (deformation of wave), (distortion). 7. The types of vehicle collision injuries include (lateral bending), (vertical bending), (buckling), (lozenge), (distortion) 1. The structure of the shell with small quality, rigid and high strength is (C). A. Bone-type B. Semi-skeleton type C. Skeleton D non-carrying capacit