2Z101060施工风险管理（Construction risk management of 2Z101060）.docVIP

2Z101060施工风险管理（Construction risk management of 2Z101060） Answer: the BP35 4. The risk of knowledge, experience and capability of the construction machinery operator belongs to () type. A. economic and regulatory risks B. organizational risk C. engineering environmental risks D. Technical risks Question ask the question Answer: B 5. Technical risks may come from (). A. Loss control and safety manager negative knowledge, experience and ability B. engineering design documents C. Information security control plan Meteorological conditions [question no. questions for this question] Answer: B 6. Risk means loss (). A. irreversible B. uncertainty C. the inevitability D. impossible [question no. questions for this question] Answer: B P34 7. The risk of personal safety control plans is () risk. A. organization B. economy and management C. engineering environment D. technology Question no. questions for this question Answer: B P36 8. In the regional division of event risk, once the risk event occurs, there will be a significant loss, but the probability of occurrence is very small (). A. the risk area A B. The risk area B C. Risk area C D. Risk area D Question no. questions for this question Answer: B P35 9. In the area chart of the event risk, the least risky area is (). A. the risk area A B. The risk area B C. Risk area C D. Risk area D [answer no. questions for this question] Answer: D 10. During the construction of a project, there were serious problems of quality, but due to the lack of experience of technicians of the construction unit, there was no timely discovery, resulting in a quality accident. This risk belongs to the construction management risk type (). A. economic and management risks B. engineering environmental risks Technical risk D. Organizational risk Questions ask the question Answer: D P35 11. The following information about risk management workflow sequencing is correct (). A. Risk id