r019r3a3e - 国家汽车质量监督检测中心.DOC

CONCERNING THE ADOPTION OF UNIFORM TECHNICAL PRESCRIPTIONS FOR WHEELED VEHICLES, EQUIPMENT AND PARTS WHICH CAN BE FITTED AND/OR BE USED ON WHEELED VEHICLES AND THE CONDITIONS FOR RECIPROCAL RECOGNITION OF APPROVALS GRANTED ON THE BASIS OF THESE PRESCRIPTIONS */ 关于为轮式车辆、可安装和/或用于轮式车辆的装备和部件采用统一技术条件规定以及对等承认根据这些技术规定所作认证的条件 ?/ 国家汽车质量监督检验中心 莱茵技术（上海）有限公司北京办事处 EN 中文 Consolidated TEXT 统一文本 produced by the CONSLEG system of the Office for Official Publications of the European Communities 欧洲共同体官方出版物办公室CONSLEG体系出版 CONSLEG: Number of pages: 6 页数：6页 Office for Official Publications of the European Communities 欧洲共同体官方出版物办公室  E/ECE/324 } Add.18/Rev.3/Amend.3 E/ECE/TRANS/505 11 August 1998 AGREEMENT CONCERNING THE ADOPTION OF UNIFORM TECHNICAL PRESCRIPTIONS FOR WHEELED VEHICLES, EQUIPMENT AND PARTS WHICH CAN BE FITTED AND/OR BE USED ON WHEELED VEHICLES AND THE CONDITIONS FORECIPROCAL RECOGNITION OF APPROVALS GRANTED ON THE BASIS OF THESE PRESCRIPTIONS */ (Revision 2, including the amendments entered into force on 16 October 1995) Addendum 18: Regulation No. 19 Revision 3 - Amendment 3 Supplement 7 to the 02 series of amendments - Date of entry into force: 27 April 1998 UNIFORM PROVISIONS CONCERNING THE APPROVAL OF MOTOR VEHICLE FOG LAMPS UNITED NATIONS */ Former title of the Agreement: Agreement Concerning the Adoption of Uniform Conditions of Approval and Reciprocal Recognition of Approval for Motor Vehicle Equipment and Parts, done at Geneva on 20 March 1958. GE.98- 共 6 页第 1 页 E/ECE/324 ｝ 增补18/修订3/修正3 E/ECE/TRANS/505A 1998年8月11日 协 议 关于为轮式车辆、可安装和/或用于轮式车辆的装备和部件 采用统一技术条件规定以及对等承认 根据这些技术规定所作认证的条件 */ （修订版2，包括1995年10月16日生效的修订内容） 勘误表18：第19款条例 修订版3-修订3 02系列修正条例的补充条例7 -生效日期： 2004年4月27日 关于机动车前雾灯认证的统一规定 联合国 */ 本协定前称： 关于为汽车装备和部件采用批准以及对等承认批准的统一条件的协定，1958年3月20日在日内瓦生效。 GE.98- 共 6 页第 2 页 E/ECE/324 } Add.18/Rev.3/Amend.3 E/ECE/TRANS/505 Regulation No.19 Paragragh 2.2.1., amend to read: ... specified; it shall be H1, H2, H3, H4, H7, H8, HB3, HB4, H27W/1, H27W/2 or H filament