风扇资料(Fan data).doc

  1. 1、本文档共7页,可阅读全部内容。
  2. 2、原创力文档(book118)网站文档一经付费(服务费),不意味着购买了该文档的版权,仅供个人/单位学习、研究之用,不得用于商业用途,未经授权,严禁复制、发行、汇编、翻译或者网络传播等,侵权必究。
  3. 3、本站所有内容均由合作方或网友上传,本站不对文档的完整性、权威性及其观点立场正确性做任何保证或承诺!文档内容仅供研究参考,付费前请自行鉴别。如您付费,意味着您自己接受本站规则且自行承担风险,本站不退款、不进行额外附加服务;查看《如何避免下载的几个坑》。如果您已付费下载过本站文档,您可以点击 这里二次下载
  4. 4、如文档侵犯商业秘密、侵犯著作权、侵犯人身权等,请点击“版权申诉”(推荐),也可以打举报电话:400-050-0827(电话支持时间:9:00-18:30)。
查看更多
风扇资料(Fan data) Air volume refers to the total volume of air discharged or included in the air cooled radiator fan per minute. If measured in cubic feet, the unit is CFM; And if you do it in cubic meters, thats the CMM. The unit of air that radiator products often use is CFM (about 0.028 cubic meters per minute). The 50x50x10mm CPU fan usually reaches 10 CFM, and the 60x60x 25mm fan can usually reach CFM of 20-30. In the same condition of the heat sink material, air volume is the most important index to measure the heat dissipation capacity of the air cooling radiator. Obviously, the larger the air radiator, the higher the heat dissipation capacity. Thats because the heat capacity ratio of the air is a certain, larger air volume, which is that more air per unit of time can take away more heat. Of course, the cooling effect is related to the flow of wind in the same amount of air. Wind volume and wind pressure and wind pressure are two relative concepts. Generally speaking, to design fans air volume is big, must sacrifice some wind pressure. If the fan can bring a lot of air flow, but the wind pressure is small, the wind is less than the bottom of the radiator (this is why some of the fan speed is high, air volume is very big, but it is the reason why cooling effect is not good). Conversely, the wind pressure is large, the wind volume is small, not enough cold air and the heat exchanger heat exchange, also can cause the heat dissipation effect is not good. The radiator of the general aluminum fins requires the fan to have enough wind pressure, while the fins of the copper fins require the fan to be large enough. The fins are less dense than the fins, which require more air pressure than the fins, otherwise the air will not flow through the fins, and the cooling effect will be greatly reduced. So to say different radiators, the manufacturer will match the fan with the appropriate air volume and wind pressure according to the need, and not the fan that pursues the big a

文档评论(0)

jgx3536 + 关注
实名认证
内容提供者

该用户很懒,什么也没介绍

版权声明书
用户编号:6111134150000003

1亿VIP精品文档

相关文档