高速路驾驶,如何安全避让大货车（Highway driving, how to avoid large goods vehicles）.doc

高速路驾驶,如何安全避让大货车（Highway driving, how to avoid large goods vehicles） Highway driving, how to avoid large goods vehicles? Whether on the highway or on the state road, the van, whistling past you, does not necessarily follow the rules completely. Sometimes, when you want to pass, you will find that the fast lane, slow lane, and even in front of the path of the emergency stop of the iron curtain also have three size truck had formed the solid wall, is more terrible, a lot of behind the big truck didnt install the ground clearance is short, meet the national standards of anti-collision board, but is wanton with bare. On the highway, facing a big truck, how can we avoid it, how can we coexist with peace, safe driving? You can overtake them as soon as possible In the process of driving, if you encounter a load truck ahead, want to go to the, more than the correct method is: first off the lorries the distance of 100 metres, observe the road ahead, in ensuring that the road ahead is good, good view, overtaking turn light, sound, and frequency flash headlights, at the same time observe the van. If the van doesnt have a traffic lane and does not sway to the right, then increase the throttle quickly. Dont immediately go to the carriageway. Its best to get back to the normal lane with a big van about 500 meters away. During the whole process, make sure to hold the steering wheel tightly. When approaching the truck, the horn and the strobe light will be at the same time. Why do this? The purpose is to tell the truck driver to overtake. Sometimes a big van cant see your flashing light because of overloading. There are also situations where the noise cant be heard because of its own noise, so the Ming and flashing lights must be carried out simultaneously, and in the whole process, it is best not to be interrupted. Even when the lorry driver is asleep, he can be woken up by a horn to avoid an accident. Avoid blind overtaking in situations where curves or road conditions are not cle