美国气体催化剂大全（American gas catalysts）.doc

美国气体催化剂大全（American gas catalysts） Polyurethane catalyst daquan The 2011-05-24 1. Introduction to product number of American gas product number company Amine catalyst DABCO 33LVR a-3333 triethylene diamine dipropylene glycol solution, industrial standard product. The chemical structure of triethylene diamine is very unique. It is a cage compound, two nitrogen atoms connected to three sub-ethyl groups. The structure of this double molecule is very dense and symmetric. As you can see from the structural formula, there is no big substituent on N atom, and its pair of empty electrons are accessible. In the foaming system, once the carbamate bond is generated, it dissociates to facilitate further catalysis. For this reason, although triethylene diamine is not a strong base, the reaction of isocyanate groups and active hydrogen compounds is highly catalytic. Its a strong gel catalyst. The same product number of other companies, American GE: NIAX Catalyst A - 33; Tsao, Japan: TEDA L33; Domestic manufacturers generally use a-33 as product names. DABCOR 1027 1027 1027 modified triethylene diamine, used in monoethanol polyester and polyether sole liquid system, can adjust fiber and die time. DABCO 1028 1028 modified triethylene diamine, used in 1, 4-butanediol polyester and polyether sole liquid system, can adjust the fiber and die time. The DABCO 8154 8154 delayed triethylene diamine catalyst can improve foam fluidity. Delayed triethylene diamine can improve foam fluidity. The formulation requires a delayed start time, or formulations require a large number of transfer catalysts to obtain complete foam solidification. The catalytic center of the catalyst is chemically inhibited by a kind of amino acid, which contains many different combinations of the amino acid, thus providing the rules of the foaming curve. Moreover, the corrosion of this product is far lower than that of other delayed catalysts. Application: this product is suitable for all kinds of convenient injection mo