纹身机安装（Tattoo machine installation）.doc

纹身机安装（Tattoo machine installation） The use of green soap for the use of green soap is used in the tattoo machine JBP series tattoo machine research and development of various kinds of professional beauty instrument products, product quality excellent, guarantees multi-function tattoo machine, avoid user trouble back at home, very powerful, 29000 turn, imported power regulating speed, the output power but can small, can be used for tattoos, eyebrow tattoo, floats the lip, easy coloring. 1. How the tattoo works: The transformer is connected to 220V (110V) 50HZ alternating current, converted to direct current, and then into the tattoo machine. The working voltage is 6-10v. Two main coil magnetic field and the four square iron, spray, suction effect, the quartet iron with shrapnel elastic produce high-speed reciprocating movement up and down, the quartet iron drive tattoo needle work, the needle into the skin, the pigment into the surface of the skin. 2. Adjustment method of tattoo machine: 1. The transformer is connected to 110 V, 220 V) ac (please note that the switch of POWER behind 110 V to 220 V, choose you want to use an alternating current) to open the POWER switch POWER (1 said connected, 0 means disconnect) indicates the light is red, adjust button VOLTAGF, clockwise rotation slowly, V table (digital display table shows several) will slowly turn (A said only when the tattoo machine work will move), the V table pointer to 6-12 V (note: the voltage is higher, the greater the POWER output, the faster speed. The work required and regulate) and then insert the plug of the cable POWER supply holes, then pedal switch with another POWER supply holes. 2. Hook the other end of the cable to the end of the brow (insert the tattoo machine on the socket), then step on the pedal switch and the tattoo machine will start. In the power of the light is red, V table 6-10 V, but tattoo machine fails to start (a. may promptly contact did not reach the designated position; b. may tat