得宝一体机的操作代码及错误代码（The operation code and error code of the depot）.doc

下载文档 降价啦

38
0
约1.1万字
约 20页
2017-08-04 发布于河南
举报
版权申诉
保障服务

得宝一体机的操作代码及错误代码（The operation code and error code of the depot）.doc

1、本文档共20页，可阅读全部内容。
2、原创力文档（book118）网站文档一经付费（服务费），不意味着购买了该文档的版权，仅供个人/单位学习、研究之用，不得用于商业用途，未经授权，严禁复制、发行、汇编、翻译或者网络传播等，侵权必究。
3、本站所有内容均由合作方或网友上传，本站不对文档的完整性、权威性及其观点立场正确性做任何保证或承诺！文档内容仅供研究参考，付费前请自行鉴别。如您付费，意味着您自己接受本站规则且自行承担风险，本站不退款、不进行额外附加服务；查看《如何避免下载的几个坑》。如果您已付费下载过本站文档，您可以点击这里二次下载。
4、如文档侵犯商业秘密、侵犯著作权、侵犯人身权等，请点击“版权申诉”（推荐），也可以打举报电话：400-050-0827(电话支持时间：9:00-18:30)。

得宝一体机的操作代码及错误代码（The operation code and error code of the depot） The operating code of the depot machine and the wrong DP error display code Display mode The original for Test sequence E001 The main motor (M1) is not normal; The main motor substrate is not normal; The main substrate is not normal; The coding sensor (PS7) is not normal When printing drum rotation indicator light, coding sensor; (PS7) cannot check the edge in 1 second E002 The lifting motor (M2) is not normal; The lifting cap sensor (PS9) is not normal; The lower floor sensor (MS6) is not normal; The driving substrate is not normal; The main substrate is not normal; The lift is out of order When the lift motor (M2) upward movement in 9 seconds, the lift cannot reach the upper limit self-check information indicator light When the lift motor (M2) downward movement in 9 seconds, the lift cannot reach the lower limit self-check information indicator light E003 Cutting motor (M5) abnormal; The cutting limit on the operating side (MS1) is not normal; The cutting limit of the non-operating side (MS2) is not normal; The driving substrate is not normal; The main substrate is not normal; Wax paper in the cutting device part of the paper The cutting motor is not able to reach the limit switch of the removable cutting tool for 3 seconds when the cutting motor drives the signal E004 The combination indicator is abnormal; The transformer device is not normal; The CCD is not normal; The AD substrate is not normal; The main substrate is not normal Combined light intensity detection, the amount of light received by the CCD cannot reach the regulation value (only one time of light checking, the power is closed). E005 Ink drum l / \ \ \ motor is not normal The motor is unable to touch the relevant switch within 15 seconds of the drive signal of the ink drum E006 The contact motor is not normal The motor failed to reach the relevant switch within 25 seconds of the rotation of the contact motor E008 1 \ \ F substrate devic