建筑工程定额与概预算（Construction engineering quota and budget）.doc

建筑工程定额与概预算（Construction engineering quota and budget） The calculation results of the project quantity are kept in two decimal places, and the direct charge is calculated. Construction project budget and cost control 1. Calculation 1. The history of a partial project time consumption data of 15 man-days m3, 20 man-days m3, 17 man-days m3, 21 man-days m3, 16 man-days m3, 40 man-days m3, 25 man-days m3, 18 man-days m3, 50 man-days m3, quadratic average method to determine the trial division subdivisional work time quota. 2. When determining the degree of stickup ceramic tile subdivisional work labor quota, because there is no historical data, and the measured method due to the influence of the operator, so the quota decided to let the quota personnel, technical personnel and production workers according to their experience estimation method to determine respectively, estimates of the above personnel as follows 1.3 m3 man-days, 1.6 m3 man-days, 0.9 m3 man-days, please press the experience estimation method to determine the man-hour quota of stickup ceramic tile. 2. Single item selection 1. The difference between construction budget and construction drawing budget is not. A, use unit B, use drawing C, calculate level D, calculate rules 2. The following items which do not belong to other direct fees are. A, temporary facility fee B, night construction increase fee C, project site pay D, inspection test fee 3. The project quantity of the integrated scaffold is calculated according to the area of the building. The center line of the outer wall is multiplied by the high B of the building and the outer edge of the outer wall times the high C of the building and the clean line of the exterior wall times the high D and the building of the building 4. A building is a rectangular plane. The outer boundary line of its outer wall is 35 meters long and 10 meters wide. A, 350 B, 420 C, 546 D, 525 5. The calculation of the amount of galvanized sheet metal works is calculated by area.