楼房接地注意（Building ground attention）.docVIP

楼房接地注意（Building ground attention） Computer room grounding The machine room usually has four kinds of grounding form, namely: Computer dedicated dc logic: the layout of dc work in the computer room of the building is a digital circuit and other potential ground network (or logical grounding network). The net is made of copper in the floor under the moving floor, according to the layout of the computer equipment, and the grid is composed of a special grounding terminal, which is connected to the computer equipment with the shortest length of braided copper wire. The computer must be used to direct the grounding to the ground terminal. Communication work: in computer system, in addition to the use of dc electrical equipment, a large number of equipment and use of ac electrical equipment. Communication work grounding is to use alternating current equipment in the computer system to make two grounding or special equipment to make metal connection to the earth. Its role is to ensure the safety of person and equipment. Communicate the implementation of the work can be divided into the computer system using communication equipment and supporting communication devices of a computer system, two cases should be independent grounding as stipulated in the appliance standards, in order to prevent electric shock risk arising from insulation damage Safety protection ground: to make a good grounding between a metal shell or frame that is insulated from the electrically charged part of the electrical equipment. If casing not grounding the casing with high potential, there is the risk of electric shock, after human exposure when insulation is punctured, grounding short circuit current will be two path along the earth wire and the human body into the earth at the same time. Computer room usually use communication equipment casing (such as air conditioner, stabilized voltage stabilizer, transformer, UPS backup power supply equipment such as shell) should also be in accordance with relev