工地验收有用的啊（Site acceptance is useful）.doc

工地验收有用的啊（Site acceptance is useful） What does the geology report look at 1. Firstly, the evaluation of the site and the Suggestions on the basic selection of the site should be clearly understood, so that the general situation of the site will be well understood. 2. Evaluation and understanding of geological structure, soil layer distribution, site stability and evenness of the site according to geological profile and physical indexes of soil layers; 3. Determine the basic form; 4. Based on the basic form, determine the foundation bearing layer, foundation buried depth, soil layer data and so on; 5. Settlement data analysis; 6. Whether the adverse geological conditions, such as soil caves, caves, soft soil and groundwater, are found to affect the basis of the geological conditions. Etc. Pay attention to the geological report about groundwater often have such a survey and did not see the groundwater during, if take the basement, venue for the impervious soil, rock, for example, when the design considering water pressure, once the foundation pit water, and water and nowhere to go, if the design without considering the trouble. 2. What is the inspection of rebar Steel anchorage; 2. Quantity and diameter of steel bar; 3 bar spacing; 4 reinforcement protection layer; 5 hoop hooks; 6 after pouring steel bar; 7. 8. Length of rebar lap and joint rate; 9. 10 reinforcement certificate and test report. What exactly is the test for In order to determine the local treatment of abnormal foundation, it is to find out the soil quality and special soil conditions of the base groove. Whether the original drilling needs to be supplemented, whether the original basic design needs to be amended, to confirm the information and the external environment of the project. Whether the soil layer of the subsoil is the soil layer of data given by the geological department when it reaches the design, whether there is any difference, it is mainly responsible for the investigation personnel; 2. Whe