工民建专业毕业论文（Graduation thesis of civil engineering）.doc

工民建专业毕业论文（Graduation thesis of civil engineering） Chapter 1 engineering general situation of the project of xinxiang jinxiu waterproof material co., LTD. 1 workshop steel structure engineering, construction specifications for 68.6 X44.5 M, monolayer steel structure, AE shaft 17 line is double slope roof, AG axis line 511 to shed roof, lower eaves of 3.1 M, 8.12 M high eaves; The built-in galvanized tin trench, with an area of about 2550M2, has a 50mm thick EPS sandwich board. The design of the project is 50 years, and the safety grade of building structure is secondary. The live load is 0.3 KN/m2. Material selection: main steel component material and Q345B, the secondary steel component is Q235. The construction contents of this engineering steel structure mainly include main steel frame member, floor board, roof and wall panel maintenance system. The main steel frame is welded h-shaped steel, and the sub-component includes pillar support, horizontal support, and connecting beam, etc. High strength bolts are used in performance grade 10.9 s-class friction high strength bolts, nuts and gasket (no.45 steel). The surface treatment of steel structural components requires the use of sand blasting or ejection method to remove the rust requirement of Sa2.0. High strength bolt connection interface using sandblast or mass ejection processing, processing after the joint between the components of friction surface slip resistance coefficient is not less than 0.50, the high strength bolt connection after coating shall be in the final twist. The surface of steel structure should thoroughly remove rust, slag, burr, oil and other adhesion before applying primer. Blasting or ejection of the main steel member surface immediately brush acid primer second, then spraying fire retardant coating, fire resistance grade level two. After the installation is completed, the parts of the unprimed primer and the parts of the transport installation shall be repainted. The parts of unpainted prime