室内消火栓系统管道安装工艺标准（Standard of indoor fire hydrant piping installation）.doc

室内消火栓系统管道安装工艺标准（Standard of indoor fire hydrant piping installation） Standard of indoor fire hydrant piping installation (604-1998), 1 scope This process applies to the installation of indoor fire hydrant system piping for civil and general industrial buildings. 2 construction preparation 2.1 main materials: 2.1.1 the pipe material of hydrant system shall be selected according to the design requirements. Generally, carbon steel pipe or seamless steel tube shall not be used Bending, rust, heavy skin and concave and convex inequality. 2.1.2 the type of hydrant box shall conform to the design requirements, and the cabinet shall be smooth and clean. No rust in metal case, Scratches, the door opens flexible. The box is square, the parts in the box are complete. Valve external rules, no crack, open and close, close Close tight, sealing filler is in good condition, there are product factory certificate. 2.2 main machine tools: sleeve machine, grinding wheel saw, bench drill, electric hammer, hand grinding wheel, hand electric drill, electric welding machine, electric test pump, etc Machinery. Sets of silk board, pipe tongs, vise, pressure tongs, chain tongs, hammer, hacksaw, spanner, nail gun, reverse chain, electric welding Such tools. 2.3 operating conditions: 2.3.1 construction drawings and related technical documents shall be complete, and the on-site water, electricity and gas shall meet the continuous construction requirements and system equipment The material can guarantee normal construction. 2.3.2 the base line required for piping and box installation shall be determined and marked. The reserved and pre-buried has been completed with the construction. 3 operation process 3.1 technological process: Installation preparation - dry pipe installation - box and branch installation - box fittings installation - water debugging 3.2 installation preparation: 3.2.1 carefully familiar with the drawing, combined with the on-site situation to verify the coordinates of the pipe